ImAdjSoftCCD - Options
ImAdjSoftCCD has some options that can be performed as part of scheduled imaging.
On Scheduled Start
Cooler On - Turn the cooler on when scheduled image run commences. This is needed if you elect to turn the cooler off when not imaging (below).
During Imaging
Delete RAW - CCDSoft saves all intermediate files, so if calibration is setup, CCDSoft will keep the uncalibrated RAW images as well. ImAdjSoft will process the calibrated images and may be setup to delete the original images, but this will leave behind the RAW images. Checking this checkbox will have the plugin delete the RAW images as well, so that all images are cleaned up in concert with ImAdjSoft.
On Scheduled End
Cooler Off - Check this option to turn off cooling when sceduled imaging completes. Some cameras have been known to draw in excess moisture during the day when the cooler is battling to keep the temperature at the setpoint. Turning off the cooler in daytime helps solve this problem.
Run ImAdjSoft - Checking this checkbox will cause imAdjSoft to be called one final time after a scheduled image run has completed. For this to work, a final image must be selected to run ImAdjSoft with (displayed below), by clicking the Select Image button and selecting the image.
Note: The stop image directory must also contain an ImAdjSoft layout in order to be processed. This is setup as any other layout and can be configured in a number of ways.
For example, If a static image is to be uploaded with no processing performed, this image can be placed in it's own directory and a new layout created in there that does no processing, but has the relevant FTP upload setup in it. ImAdjSoft will then simply do nothing to the image, just upload it when Image capture has been stopped.
If you want to use a static image in this way, remember to disable deletion of unprocessed images in the layout for this image. Otherwise ImAdjSoft will delete your static image and it won't be there next time you want to use it.